US13 2-Way Articulating Borescope CE EMC Certificate – XK2111013081C

Certificate of Conformity from SiCT Lab for Shenzhen Yonghengfeng Borescope US13 under EU directives, with date, CE mark and signatures.

Document Details

Product ModelUS13
Model Description2-Way Articulating endoscope
Document TypeCE EMC
Certificate NumberXK2111013081C
Certificate Holder / ApplicantShenzhen Yonghengfeng Intelligent Device CO., LTD
Issuing OrganizationShenzhen SiCT Technology Co., Ltd.
Document Scope / StandardsEMC Directive 2014/30/EU; EN 55011:2016+A1:2020; EN 61000-6-1:2019; EN IEC 61000-3-2:2019; EN 61000-3-3:2013+A1:2019. Evaluated sample: US13 Borescope.
Issue Date16 December 2021
Related Test ReportXK2111013081E

What This Document Is

This CE EMC Certificate of Conformity documents the electromagnetic compatibility assessment of the US13 Borescope under EU EMC Directive 2014/30/EU.

The supporting 40-page test report, XK2111013081E, was issued by Shenzhen SiCT Technology Co., Ltd. on December 16, 2021. It contains electromagnetic emission measurements, power fluctuation results and immunity testing records for the submitted US13 sample.

The report identifies an input rating of 5V/2A (10W) and an output rating of DC 3.7V/500mA (1.85W). Testing was documented under Mode 1, with the equipment running during the evaluation.

What This Certificate Covers

The report provides several measurable results specific to the evaluated US13 configuration.

Conducted and radiated emissions: Conducted emission records cover the 150kHz–30MHz frequency range, with separate line and neutral measurement plots. Radiated disturbances were measured from 30MHz to 1GHz at a 3-meter test distance using horizontal and vertical antenna polarizations. The recorded emission measurements are presented against EN 55011 Class B limits.

Voltage fluctuations and flicker: The report records a short-term flicker value (Pst) of 0.082 against a limit of 1.000. Relative steady-state voltage change (dc) measured 0.006% against 3.300%, while maximum relative voltage change (dmax) was 0.105% against 6.000%. The recorded voltage-change duration was 236ms against a 500ms limit. All four entries received PASS results.

Electromagnetic immunity: Electrostatic discharge testing included ±8kV air discharge and ±4kV contact discharge, with measurements covering the screen, gaps, ports, buttons, metal housing and coupling planes. Radiated RF immunity testing was conducted from 80MHz to 1GHz at 10V/m, with the report recording a PASS result under Performance Criterion A.

For harmonic current assessment, the report states that the evaluated equipment’s input power was below 75W and describes the corresponding exemption from direct harmonic measurement.

These results represent the submitted sample and its documented operating conditions.

Why It Matters for Buyers

For EU distributors, importers and OEM buyers, the SiCT report provides traceable EMC evidence for the evaluated US13 configuration.

The line and neutral emission plots, radiated disturbance measurements and numerical flicker results allow technical teams to review more than a certificate-level conformity statement.

The ESD and RF immunity records also help buyers assess the scope of electromagnetic testing performed while the borescope was operating.

For OEM/ODM projects, changes to power supplies, electronic assemblies, connection cables or the enclosure should be reviewed against the tested configuration. Additional evaluation may be necessary where such changes could affect electromagnetic compatibility.

QBH can assist buyers in matching the available US13 EMC documentation to the configuration specified for procurement.

The certificate reflects sample evaluation and does not establish continuous production certification or compliance with unrelated EU regulatory requirements.

Related Certifications & Resources

Find CE, FCC, RoHS and related compliance records for QBH borescopes, pipe inspection cameras, diagnostic tools and cleaning equipment. Select your product family, then check the documents available for your exact model and configuration.

US20 engine inspection borescope camera Borescope Magnification camera

Industrial & Automotive Borescopes

CE, FCC and model-specific records

AH100 Video Plumbing Inspection Sewer Camera Self-Leveling 9 HD Plumbing Pipe Camera with Depth Marking Zoom and Adjustable Brightness LED Lights Ideal for Drain Pipes Wells Machinery and Industrial​

Pipe Inspection Cameras

Pipe camera compliance documents

Technician using a camera-guided automotive A/C evaporator cleaning tool inside a vehicle.

A/C Evaporator Cleaning Equipment

Cleaning equipment certifications

Brake Fluid Moisture Tester

Automotive Diagnostic Tools

Tester and diagnostic tool records

Shenzhen Yonghengfeng SYID Official SGS ISO9001 B2B Certificate QBH borescope Specialist

ISO 9001:2015 Quality Management

SGS-certified manufacturing quality system

Eight conformity certificates and test report covers displayed in two rows.

All Product Certifications

Browse all available document families

Need Compliance Documents for Your OEM Project?

Tell us your product model, target market and required configuration. Our team can help confirm the available certification records and supporting documentation.