WT01 Brake Fluid Moisture Tester CE EMC Certificate – XK2311013094C
Document Details
| Product Model | WT01 |
|---|---|
| Model Description | Brake Fluid Moisture Tester |
| Document Type | CE EMC |
| Certificate Number | XK2311013094C |
| Certificate Holder / Applicant | Shenzhen Yonghengfeng Intelligent Device Co., Ltd |
| Issuing Organization | Shenzhen SiCT Technology Co., Ltd. |
| Document Scope / Standards | EMC Directive 2014/30/EU; EN 55011:2016+A2:2021; EN IEC 61000-6-1:2019; EN IEC 61000-3-2:2019+A1:2021; EN 61000-3-3:2013+A1:2019. Evaluated sample: WT01 Brake Fluid Moisture Tester. |
| Issue Date | 21 November 2023 |
| Related Test Report | XK2311013094E |
What This Document Is
This CE EMC Certificate of Conformity documents the electromagnetic compatibility assessment of the WT01 Brake Fluid Moisture Tester under EU EMC Directive 2014/30/EU.
The supporting 37-page laboratory report, XK2311013094E, was prepared by Shenzhen SiCT Technology Co., Ltd. The report records electromagnetic emission measurements and immunity testing for the submitted WT01 sample.
The evaluated equipment was operated in Power on mode with a DC 3.7V supply. The applicable assessments covered radiated disturbances, electrostatic discharge immunity and radiated radio-frequency immunity.
What This Certificate Covers
The report provides specific electromagnetic compatibility results for the evaluated WT01 configuration.
Radiated emissions: Measurements were performed from 30MHz to 1GHz at a 3-meter test distance under EN 55011 Class B limits. The report includes six recorded emission readings for horizontal antenna polarization and six for vertical polarization. All reported measurement levels were below their corresponding limits, and the radiated emission assessment received a PASS conclusion.
Electrostatic discharge immunity: Testing included air discharges up to ±8kV and contact discharges up to ±4kV. The evaluated locations included the screen, buttons, enclosure gaps and additional contact and coupling-plane positions. The screen, button and gap air-discharge tests recorded Performance A observations, while the direct-contact test recorded Performance B. The overall ESD assessment met the required Performance Criterion B and received a PASS conclusion.
Radiated RF immunity: The laboratory evaluated the WT01 at 3V/m across 80MHz–1GHz, using 80% amplitude modulation at 1kHz. Testing covered the front, rear, left and right sides with horizontal and vertical field polarization. All four directions recorded Performance Criterion A, and the assessment received a PASS conclusion.
Conducted emissions, harmonic current emissions, voltage fluctuations and flicker, electrical fast transients, surge immunity, conducted RF immunity and voltage dips were classified as not applicable in the report. These items should not be represented as completed tests with PASS results.
The findings apply to the submitted WT01 sample and the documented operating configuration.
Why It Matters for Buyers
For EU importers, distributors and OEM buyers sourcing brake fluid moisture testers, the supporting report provides traceable electromagnetic compatibility evidence for the tested WT01 configuration.
The radiated emission measurement tables allow technical teams to compare recorded emission levels with the specified Class B limits. The ESD results provide additional information about the response of the display, buttons and accessible enclosure areas to electrostatic discharge.
The radiated RF immunity results are relevant when evaluating the tested instrument’s behavior under the specified electromagnetic field conditions.
For OEM/ODM projects, changes to the PCB layout, display assembly, enclosure, power supply or internal wiring should be reviewed against the documented test configuration. Such modifications may require additional EMC evaluation.
QBH can assist buyers in identifying the corresponding WT01 test documentation and reviewing configuration differences before procurement.
This certificate is based on evaluation of the submitted sample and does not establish continuous production certification or compliance with unrelated EU requirements.
Related Certifications & Resources
Find CE, FCC, RoHS and related compliance records for QBH borescopes, pipe inspection cameras, diagnostic tools and cleaning equipment. Select your product family, then check the documents available for your exact model and configuration.

Pipe Inspection Cameras
Pipe camera compliance documents

A/C Evaporator Cleaning Equipment
Cleaning equipment certifications

Automotive Diagnostic Tools
Tester and diagnostic tool records




