WT05 Ignition Analyzer FCC Part 18 Verification – WTH20H10080226X1E

Certificate titled Verification of Conformity from Shenzhen Hongcai Testing for Ignition Analyzer model WT05, with a blue ornate border and stamp image.

Document Details

Product ModelWT05
Model DescriptionAutomotive Diagnostic Tools
Document TypeFCC Other
Certificate NumberWTH20H10080226X1E
Certificate Holder / ApplicantShenzhen Yonghengfeng Intelligent Device Co., Ltd.
Issuing OrganizationShenzhen Hongcai Testing Technology Co., Ltd.
Document Scope / StandardsFCC Part 18 Verification of Conformity for the WT05 Ignition Analyzer. The associated 16-page report WTH20H10080226X1E records a Compliant verdict for radiated emissions under Section 18.305(b), measured from 30 MHz to 1 GHz at 3 meters. Conducted emissions under Section 18.307(b) are marked Not Applicable. The tested equipment is identified as DC 9V, 0.02A, 0.18W. The report states that it was produced on the basis of WTH20H10080226E, and the applicability of FCC Part 18 requires confirmation.
Issue Date18 November 2020
Related Test ReportWTH20H10080226X1E

What This Document Is

This Verification of Conformity document records the electromagnetic emission assessment of the WT05 Ignition Analyzer against FCC 47 CFR Part 18, as specified in the original laboratory documents.

The supporting 16-page test report references ANSI C63.4:2014 and FCC/OST MP-5 measurement procedures. It includes radiated emission results, operating-mode descriptions, laboratory equipment information and photographs of the evaluated analyzer.

The laboratory recorded a Compliant verdict for radiated emissions. The report also states that it was produced on the basis of an earlier report, WTH20H10080226E. The relationship between those report versions should be confirmed when reviewing the complete technical file.

This historical verification document is not an FCC Certification grant or evidence of an assigned FCC ID.

What This Certificate Covers

The tested WT05 is identified as an Ignition Analyzer with a DC 9V input, rated current of 0.02A and rated power of 0.18W.

The report lists two operating modes, TM1 (Charge) and TM2 (Discharge), as part of the equipment setup. These descriptions do not, by themselves, establish separate passing results for every operating mode.

Radiated emissions were assessed under FCC Section 18.305(b) using a 3-meter measurement arrangement over 30 MHz to 1 GHz. The report provides separate horizontal and vertical antenna-polarization plots, together with frequency-specific readings and compliance margins.

The laboratory recorded a Compliant result for the evaluated radiated emission assessment. Conducted emissions under FCC Section 18.307(b) were marked Not Applicable, rather than independently tested and passed.

The report also includes photographs of the analyzer’s display and control buttons, connected probe cable, rear enclosure, internal printed circuit boards and radiated-emission test setup. These images provide useful references for identifying the hardware version represented by the test evidence.

The findings concern the submitted sample and its documented electrical configuration. They do not establish ignition measurement accuracy, electrical safety, electromagnetic immunity or continuing conformity of modified production units.

Why It Matters for Buyers

For US importers and automotive diagnostic tool distributors, the report provides historical laboratory evidence of radiated emission performance for the evaluated WT05 Ignition Analyzer.

The product and PCB photographs can help buyers compare the original tested sample with the model currently offered for supply, particularly its probe connection, display, power arrangement and internal electronics.

The applicable FCC equipment classification should be reviewed before relying on this document for US distribution because the laboratory assessment references Part 18. The appropriate authorization procedure and required compliance information must be determined for the actual product configuration.

For OEM/ODM projects, changes to the probe cable, printed circuit board, display electronics or power system may affect the applicability of the historical emission data.

QBH can assist distributors and private-label customers in reviewing the available WT05 test documentation, comparing it with the requested hardware configuration and identifying where updated evidence or further testing may be needed.

Related Certifications & Resources

Find CE, FCC, RoHS and related compliance records for QBH borescopes, pipe inspection cameras, diagnostic tools and cleaning equipment. Select your product family, then check the documents available for your exact model and configuration.

US20 engine inspection borescope camera Borescope Magnification camera

Industrial & Automotive Borescopes

CE, FCC and model-specific records

AH100 Video Plumbing Inspection Sewer Camera Self-Leveling 9 HD Plumbing Pipe Camera with Depth Marking Zoom and Adjustable Brightness LED Lights Ideal for Drain Pipes Wells Machinery and Industrial​

Pipe Inspection Cameras

Pipe camera compliance documents

Technician using a camera-guided automotive A/C evaporator cleaning tool inside a vehicle.

A/C Evaporator Cleaning Equipment

Cleaning equipment certifications

Brake Fluid Moisture Tester

Automotive Diagnostic Tools

Tester and diagnostic tool records

Shenzhen Yonghengfeng SYID Official SGS ISO9001 B2B Certificate QBH borescope Specialist

ISO 9001:2015 Quality Management

SGS-certified manufacturing quality system

Eight conformity certificates and test report covers displayed in two rows.

All Product Certifications

Browse all available document families

Need Compliance Documents for Your OEM Project?

Tell us your product model, target market and required configuration. Our team can help confirm the available certification records and supporting documentation.